PS4660T and PS5560T User Manual
Copyright © 9 May 2013 by Planar Systems, Inc. All rights reserved. Contents of this publication may not be reproduced in any form without permission of Planar Systems, Inc. Trademark Credits Windows™ is a trademark of Microsoft Corp. All other names are trademarks or registered trademarks of their respective companies. Disclaimer The information contained in this document is subject to change without notice. Planar Systems, Inc. makes no warranty of any kind with regard to this material.
Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents Using the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Using the Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Multi-Touch Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction The PS4660T/PS5560T is a 46” or 55” diagonal edge-lit LED LCD touchscreen display that can be wall mounted, ceiling mounted or mounted on a stand. The display can be portrait or landscape. The PS4660T/PS5560T is ultra slim and has an aspect ratio of 1.77 (16:9). The PS4660T/PS5560T has a native HD (1920 x 1080) resolution. Additional features of the Planar PS4660T/PS5560T include six-point touch, ambient light control, and display control through RS232.
Safety Information Safety Information Before using the PS4660T/PS5560T, please read this manual thoroughly to help protect against damage to property, and to ensure personnel safety. • Be sure to observe the following instructions. • For your safety, be sure to observe ALL the warnings detailed in this manual. • For installation or adjustment, please follow this manual’s instructions, and refer all servicing to qualified service personnel.
Important Safety Instructions Important Safety Instructions 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use the display near water. 6 Clean the LCD screens with an LCD screen cleaner or LCD wipes. 7 Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 8 Do not defeat the safety purpose of the polarized or grounding type plug.
Recommended Usage Recommended Usage In order to get the most out of your LCD, use the following recommended guidelines to optimize the display. Burn-In Versus Temporary Image Retention Burn-in causes the screen to retain an image essentially forever, with little or no way to correct the problem. Under normal use, an LCD will not experience burn-in, as plasma displays do, nor will it retain images in any way. Normal use of an LCD is defined as displaying continuously changing video patterns or images.
European Union Disposal Information European Union Disposal Information Français English ■ Disposal of old Electrical & Electronic Equipment (Applicable throughout the European Union and other European countries with separate collection programs) ■ Mise au rebut des équipements électriques et électroniques usagés (Valable dans l’ensemble de l’Union Européenne ainsi que dans les pays européens disposant de programmes distincts de collecte des déchets) Deutsch ■ Entsorgung von elektrischen & elektronische
Normal Usage Guidelines Normal Usage Guidelines Normal use of the LCD is defined as operating in the open air to prevent heat buildup, and without direct or indirect heat sources such as lighting fixtures, heating ducts, or direct sunlight that can cause the modules to experience high operating temperatures. For all modules, do not block fans or ventilation openings.
Cleaning the PS4660T/PS5560T Cleaning the PS4660T/PS5560T If dust has collected on the power plug, removed the plug from the outlet and clean off the dust. Dust build-up may cause a fire. Remove the power plug before cleaning. Failure to do so may result in electrical shock or damage. Keep the following points in mind when cleaning the surface of the display: • When the surface becomes dirty, wipe the surface lightly with a soft clean cloth.
Unpacking the PS4660T/PS5560T Package Contents Unpacking the PS4660T/PS5560T The PS4660T/PS5560T is packed in a cardboard box and may be banded as part of two types of custom pallets, depending on the number of displays shipped. The PS4660T/PS5560T is packed using foam to protect it during shipping. Before unpacking the display, prepare a stable, level and clean surface near a wall outlet.
Unpacking the PS4660T/PS5560T 2 Remove the top shipping foam, accessory bag and packing list.
Contents of the Accessory Kit Contents of the Accessory Kit Part 10 Picture Quantity VGA Cable (D-sub) 1 USB Drive 1 Power cord 1 IR extender cable 1 OSD Remote (AAA batteries included) 1 USB cable 1 PS4660T and PS5560T User Guide
PS4660T - Front and Side Dimensions PS4660T - Front and Side 41.6in 1057.1mm 40.2in 1021.1mm 24.1in 611.9mm 22.7in 575.9mm 46.0in 1169.6mm [1.8in] 1.7in 45.0mm 42.4mm [2.5in] 2.4in 64.2mm 61.
PS4660T - Rear PS4660T - Rear 7.9in 200mm 3.9in 100mm 15.7in 400mm 3.9in 100mm 15.7in 400mm 6X M4 THREADED INSERTS, 6MM MAX. SCREW LENGTH 3.9in 100mm 8X M8 THREADED INSERTS PS5560T - Front and Side 49.2in 1248.6mm 47.7in 1212.6mm 26.9in 683.4mm 28.3in 719.4mm 55in 1390mm 1.8in 45.3mm 2.6in 65.
PS5560T - Rear PS5560T - Rear 15.7in 400mm 7.9in 200mm 3.9in 100mm 15.7in 400mm 3.9in 100mm 6X M4 THREADED INSERTS FOR MEDIA PLAYER (6MM MAX. SCREW LENGTH) 3.
Before You Begin Installing a PS4660T/PS5560T This section explains how to install an PS4660T/PS5560T. We suggest that you read the entire section before you attempt to install the unit. Before You Begin Make sure you have all the items in these lists before you begin unpacking and installing your displays.
Prepare Your Installation Location Prepare Your Installation Location You should have prepared the area where you will install the unit. If custom enclosures are part of the installation, they must be fully designed to accommodate the installation of the displays, as well as the installed unit and ventilation and cooling requirements.
OSD Keypad Operating the PS4660T/PS5560T OSD Keypad The OSD keypad is located on the rear of the display. OSD keypad 7.9in 200mm 3.9in 100mm 15.7in 400mm 3.9in 100mm 15.7in 400mm 6X M4 THREADED INSERTS, 6MM MAX. SCREW LENGTH 3.
Remote Control Receiver Remote Control Receiver The remote control receiver is located near the keypad on the rear of the display. Use the IR extender cable for operating the remote from the front of the display. Power ON standby indicator Remote control receiver 7.9in 200mm 3.9in 100mm 15.7in 400mm 3.9in 100mm 15.7in 400mm 6X M4 THREADED INSERTS, 6MM MAX. SCREW LENGTH 3.9in 100mm 8X M8 THREADED INSERTS LED Indicators The LED indicator light is located on the rear of the display near the keypad.
Using the Display in Portrait Mode Using the Display in Portrait Mode When using the display in the portrait position and looking at the rear of the display, it should be rotated according to the arrow stickers on the back of the display. This will allow for proper ventilation. Then select the OSD rotation of landscape or portrait on the OSD menu (MAIN MENU > BASIC > OSD ROTATION). Caution: Improper ventilation may shorten the life of the display.
Using the Remote Control Using the Remote Control See the following page for descriptions all of the buttons on the remote control.
Using the Remote Control Num Function Turns the display on and off 1 2 INFO Provides source and resolution information 3 VGA Selects the PC’s RGB source DVI Selects the PC’s DVI source HDMI 1 Selects the HDMI source COMP Not available AV (VIDEO) Not available HDMI 2 Not available PIP position Not available Display port Selects the display port source HD-SDI 1 Not available PIP Not available S-V Not available HD-SDI 2 Not available 7 SWAP Not available 8 P-SOURCE Not avai
Locking/Unlocking the OSD Menus Num 12 cont. Function Description AUTO Synchronizes the display to the source SOURCE Allows selection of the different sources VOLUME - Decreases the sound volume VOLUME + Increases the sound volume Locking/Unlocking the OSD Menus You can lock or unlock the OSD menus by pressing a series of key commands on the remote control. To lock the menu, press the following keys on the remote in the order listed: ENTER, ENTER, EXIT, EXIT, ENTER and EXIT.
Using the Touch Screen 3 Close the battery cover. Replace the battery cover in the direction of the arrow and snap it back into place. Using the Touch Screen You can use the optical touch screen to control your operating system. The touch screen can emulate basic mouse functions and supports multi-touch functions for Windows 7*. The following table shows a list of functions you can use on the touch screen. Note: *Ensure that you have installed the USB cable on the display to a computer.
Performing Basic Functions Right-click Press on the target. Hold and wait for a blue ring to appear. Release your finger. Drag or select Drag one finger left or right. Pan up/down/back /forward Quickly drag your finger (flick) in a desired direction. Wake up from Windows sleep mode (S3) Press and hold for four seconds.
Multi-Touch Functions Multi-Touch Functions The following table shows how to perform multi-touch tasks using the touch screen for Windows 7 - Home Premium, Professional, Enterprise and Ultimate versions. Function Action Right-click Press on the target. Tap the screen with another finger. Release the second finger. Scrolling Drag one or two fingers up or down. or Zoom Move two fingers apart or toward each other. Rotate • • 24 Move two fingers in opposing directions.
Turning the PS4660T/PS5560T On Turning the PS4660T/PS5560T On 1 Insert the power cord into the display and the power outlet. 2 Ensure the AC switch is set to “—“. 3 Press the power button on the remote or side control panel. Turning the PS4660T/PS5560T Off With the power on, press the power button on the remote or side control panel to put the LCD panel in a standby mode. To turn off power completely, turn the AC switch to “O” or disconnect the AC power cord from the power outlet.
OSD Menu Functions OSD Menu Functions There are two menu modes: Graphics (DVI and VGA) and Video (HDMI and DisplayPort). Any differences are noted in the table.
OSD Menu Functions Main Menu Field Description Submenu DP Audio Input Audio input control Internal Speakers Basic Advanced System Setting DisplayPort/PC Off, On OSD Transparent Adjust the OSD transparent function 0~12 OSD Location Adjust the OSD location ,,▲,▼ OSD Rotation Adjust the OSD rotation Landscape/Portrait OSD Language Select the OSD language English/ Chinese OSD Timeout Select the OSD timeout seconds 5~120 sec.
OSD Menus OSD Menus Video Menus Audio Menu 28 PS4660T and PS5560T User Guide
Basic Menus Basic Menus RTC Submenus User Mode Same Settings On Work Days Mode Same Settings On All Mode PS4660T and PS5560T User Guide 29
Advanced Menu Advanced Menu System Menu 30 PS4660T and PS5560T User Guide
Navigating Through the Menus Navigating Through the Menus 1 With the power on, press MENU. The VIDEO menu appears. 2 Within the menu, use ▲, ▼, , and ENTER to navigate through the menus and adjust options. 3 Press MENU to return to the previous menu. To exit the menu system, press EXIT. Video Menu This menu is used for making common image adjustments.
Video Menu Sharpness Adjusts the definition of the picture. Press or , select the desired level, and press ENTER. Range: 0~8; Default: 6 Saturation Adjusts the brilliance and brightness (Video Mode only). Press or , select the desired level, and press ENTER. Range: 0~100; Default: 50 Hue Increases or decreases the green hue (Video Mode only). Press or , select the desired level, and press ENTER.
Video Menu Red Gain Set Color Temperature to “User Mode” to adjust this setting. Range: 128~383 Default: 256 Green Gain Set Color Temperature to “User Mode” to adjust this setting. Range: 128~383 Default: 256 Blue Gain Set Color Temperature to “User Mode” to adjust this setting. Range: 128~383 Default: 256 Red Offset Set Color Temperature to “User Mode” to adjust this setting. Range: -50~50 Default: 0 Green Offset Set Color Temperature to “User Mode” to adjust this setting.
Audio Menu Audio Menu Volume Adjust the sound. Press or , select the desired level, and press ENTER. Range: 0~100 Default: 50 Bass Adjust the low tones (bass). Press or , select the desired level, and press ENTER. Range: -6~6 Treble Adjust the high tones (treble). Press or , select the desired level, and press ENTER. Range: -6~6 Balance Adjust the balance of the left and right speakers. Press or , select the desired level, and press ENTER.
Basic Menu Internal Speakers Disable or enable internal audio speakers. Default: Off Basic Menu This menu is used to make initial setup adjustments to the OSD (On-Screen Display) menu and other on-screen messages. OSD Transparent Set the menu transparency. Press or to select the desired level, and press ENTER. Range: 0~12 Default: 0 OSD Location Adjust the menu location (Up, Down, Left, Right). OSD Rotation Select the OSD Rotation. Press or to select the rotation.
Basic Menu/RTC (Real Time Clock) Menu OSD Timeout Options: 5~120 Default: 30 Power LED Options: Off, On Real Time Clock Options: Current Time, Timer Mode Basic Menu/RTC (Real Time Clock) Menu Real Time Current time setting Year/Month/Date, Hour: Minutes Timer Mode Timer mode selection Power on and Power off timer setup 36 PS4660T and PS5560T User Guide
Basic Menu/RTC (Real Time Clock) Menu RTC Timer Mode - User Timer Mode User mode Select the power on/off timer and specify the on/off times for each day of the week. For each day of the week, you have the following options: Enable or Disable the schedule of the day Options: Disable, Enable Default: Disable Power On/Power Off timer setup. Power On: Use the arrow keys to specify the time you want the display to turn on for the selected day.
Basic Menu/RTC (Real Time Clock) Menu RTC Timer Mode - Work Days Timer Mode Work Days mode For Monday-Friday, Saturday or Sunday, you have the following options: Enable or Disable the schedule of the work days or individual weekend days. Options: Disable, Enable Default: Disable For all days, you have the following options: Enable or Disable the schedule for Monday-Friday, Saturday and Sunday. Options: Disable, Enable Default: Disable Power On/Power Off timer setup.
Basic Menu/RTC (Real Time Clock) Menu RTC Timer Mode - All Days Timer Mode All Days mode Select all days of the week power on/off timer. For all days, you have the following options: Enable or Disable the schedule for all days of the week Options: Disable, Enable Default: Disable Power On/Power Off timer setup. Power On: Use the arrow keys to specify the time you want the display to turn on for all days of the week.
Advanced Menu Advanced Menu Auto Adjustment Forces the display to reacquire and lock to the input signal. This is useful when the signal quality is marginal. Note: This feature does not continually reacquire the signal. It only does so each time you select this option. Options: No, Yes Default: No Image Position Adjust the image location (VGA Mode only).
Advanced Menu Baud Rate Options: 115200, 38400, 19200, 9600 Default: 19200 Smart Light Control Options: Off, DCR, Light Sensor Default: Off Wake Up From Sleep Allows you to configure the display to “wake up” when it receives a digital signal through the DisplayPort, HDMI or DVI connectors. With VGA Only, the display can only “wake up” by sending an analog video signal through the VGA connector. Options: Never Sleep - The display will never enter a power saving mode.
System Menu System Menu This read-only menu provides information about the active sources and the latest firmware version.
Default Settings Default Settings The following table shows the default settings for the LCD.
Default Settings VGA 640 x 480 SVGA 800 x 600 XGA 1024 x 768 WXGA1366 x 768 1280 x 720 1280 x 768 1280 x 800 SXGA 1280 x 1024 SXGA+ 1400 x 1050 1440 x 900 WSXGA+ 1680 x 1050 EDTV HDTV UXGA 1600 x 1200 1920 x 1080 480p 576p 720p 1280 x 720 1080i 1920 x 1080 1080p 1920 x 1080 44 PS4660T and PS5560T User Guide O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O - O O O O O O O O O O O O O O O O O O O O O O O O O O O O Display Port 25.175 36 40 65 84.75 64 74.
Default Settings Specifications Item LCD panel Specification Resolution 1920 x 1080 Brightness (Typ.) 500 cd/m2 450 cd/m2 PS4660T PS5560T Contrast Ratio Typical 4000:1 Response Time PS4660T PS5560T 6.5 ms 6.5ms Aspect Ratio 16:9 Horizontal Sync. Positive/Negative Vertical Sync. Positive/Negative Connectors DisplayPort/HDMI/VGA/DVI/PC Audio in/IR Extender/Audio out Power Source Input Voltage/Frequency AC 100V~240V, 50-60 Hz Power Consumption Operation Mode (Typ.
Default Settings Item Environment Function Specification Storage Temperature Min -4°F ~ Max 140° F (-20°C ~ Max 60°C) Operating Temperature Min 41°F ~ 95°F (5°C ~ Max 35°C) Humidity 80% RH @ 104°F (40°C) Plug and Play DDC 2B Compliance RS232 D-Sub 9-pin OSD key Touch 46 7 keys ( , SOURCE, ▲, ▼, , , MENU/EXIT) Wall mount 400 x 400, 400 x 200 VESA standard Touch points Up to six simultaneous touches Touch technology Optical Touch interface USB OS Compatibility Windows 7, Windows
Default Settings Troubleshooting Before calling service personnel, please check the following table for a possible cause of the problem you are experiencing. Please note the following: • Perform the adjustments according to "Operating the PS4660T/PS5560T" on page 16. • If the problem you have experienced isn’t described below or you can’t correct the problem, stop using the PS4660T/PS5560T and contact Planar’s Technical Support Department.
Downloading Additional Documentation and Firmware Accessing Planar’s Technical Support Website 1 Go to www.planarpartners.com 2 Once you enter your login and password, you can access downloadable utility software, new firmware and user manuals. Downloading Additional Documentation and Firmware Some of the other documents for the PS4660T/PS5560T, which are or will be available on www.planar.
