Systems Computer Accessories User Manual

Saving and Recalling Configurations
m70L Installation & Configuration Guide 77
Recalling Stored Configurations
1 Press SAVE once to open the RECALL grid menu.
2 Navigate to the slot you want to recall. When navigating, you can only go to the
checked numbers. All the slots with checks have something stored in them. The
others are grayed out.
3 Press ENTER to open the RECALL SLOT menu.
Note: If this slot number has exactly the same settings that are currently being used, a
(
CURRENT) message appears on the top line.
The name of the memory is listed here, as well as all the important parameters (data)
stored in that memory slot.
Recall
1 9 17 25 33
2 10 18 26 34
3 11 19 27 35
4 12 20 28 36
5 13 21 29 37
6 14 22 30 38
7 15 23 31 39
8 16 24 32 40
Recall
Slot Number 17
Recall Now
Name AN 1366x768
Source Analog
Colorspace RGB
Resolution 1366 x 768
Wall 2 x 2 1:1
Scale/Justify One to One / Center
Postion/Overscan 168,19 / 0%
Zoom UL/ LR +0,+0 / +0,+0
Viewport UL/LR +0,+0 / +0,+0
Frequency/Phase 1602 / 22.5°
Sharpness Normal
Black Level 63 55 57
White Level 166 170 169