Systems User's Manual projector PR3010, PR3020, PR5020

DLP® Projector – User’s Manual

– 25 –

ITEM DESCRIPTION DEFAULT

Security Lock Press the cursor button to enable or disable Security Lock. When

you enable Security Lock a Register Password dialog box appears:

You can only use the following four cursor buttons,

in the

password fields. Press the cursor buttons five times in any order and con-

firm to set the password. When the password is enabled, it must be

entered every time after you power on the projector. See “Setting an Ac-

cess Password (Security Lock)” on page

15 for steps on setting the

password.

—

Audio Input Press the cursor button to toggle between PC and Video input chan-

nels.

Data Source:

Video source:

Video

Reset Press Enter or

to reset advance feature settings to default values

—

Note:

If Security Lock is enabled, you must enter the password every time the projector is turned on.

However, if the projector is already turned on, Security Lock can be disabled without knowing the

current password.