Systems User's Manual projector PR3010, PR3020, PR5020

DLP® Projector – User’s Manual
Setup Menu
Press the Menu button to open the OSD menu. Press the cursor button to move to the Setup
menu. Press the cursor
button to move up and down in the Setup menu. Press to change
values for settings, and then press Enter or
to confirm the new setting.
ITEM DESCRIPTION DEFAULT
Horizontal
Position
Press the cursor button to move the image left or right. (Range: 0 – 100) 50
Vertical
Position
Press the cursor button to move the image up or down. (Range: 0 – 100) 50
Keystone Press the cursor button to correct distortion of the projected image.
(Range: -50 – +50)
0
Aspect Ratio Press the cursor button to toggle between the 4:3 standard format and the
16:9 High Definition TV (HDTV) format.
4:3
Advance
Feature
See “Advance Feature” on page 24. —
Reset Resets Keystone and Aspect Ratio to default values —
Setup Menu Functions Available for Connected Source
Function RGB DVI Component Video Composite Video S-video
H Position x
V Position x
Keystone correction x x x x x
Aspect Ratio x x x x x
Advance Feature x x x x x
– 23 –