Systems Flat Panel Television User Manual

Adjusting Position
m40L/m46L Installation & Configuration Guide 43
Adjusting Position
Position moves the picture on the screen but does not move the menus.
Picture Position
Press the SIZE/POS button once on the remote to open the PICTURE POSITION menu.
The four arrow keys move the picture on the screen.
The numbers for Horizontal and Vertical Position refer to the
number of pixels from sync to the first displayed pixel. These
numbers get smaller as the picture moves up and to the left.
Horizontal Position
This number shows the number of pixels from the beginning of H sync to the first
active pixel. Because there are many black pixels after H sync, this number will not be
zero when the picture is at the left border of the screen.
Vertical Position
This number is the number of lines from V sync to the first active line, so it will not be
zero when the picture is at the top of the screen.
Note: Adjusting the Vertical Position too far may cause the image to jump or hop. If the
image appears to flicker or hop, readjust the Vertical Position.
Picture Position
Use arrow keys to move image
Horizontal Position 168
Vertical Position 19