Systems Flat Panel Television User Manual
Table Of Contents
- Table of Contents
- Safety for You and the m40L/m46L
- Recommended Usage
- VESA Mounts, General Description
- Before You Begin
- Installation Checklist
- Unpacking and Checking Accessories
- Connecting Source Cables
- Connecting Power
- Connecting RS232 Communication
- Connecting RS232 Cables
- Using the Remote
- Selecting the Source
- Automatically Selecting the Source
- Manually Selecting the Source
- Adjusting Input Levels
- Adjusting Frequency and Phase
- Aspect Ratio Settings
- Adjusting Sharpness
- Adjusting Position
- Tiling a Display
- Zoom and Viewport
- Adjusting Color Balance
- Advanced Options
- Backlight Control
- Serial Port Settings and Diagnostics
- Saving and Recalling Configurations
- Checking Unit Status
- Where to Go From Here
- Downloading Additional Documentation and Firmware
- Downloading Utility Software
- m40L Dimensions
- m46L Dimensions
- Index
Recommended Usage
m40L/m46L Installation & Configuration Guide 7
Normal Use Thermal Guidelines
Normal use of an m40L/m46L is defined as operating in the open air to prevent heat
buildup, and without direct or indirect heat sources such as adjacent displays,
lighting fixtures, heating ducts, or direct sunlight that can cause the display to
experience high operating temperatures. At 2000 meters or below, the maximum
ambient operating specification cannot be above 30º C nor below the minimum
ambient operating specification of 0º C. If one of these conditions exists, it is up to
the installer to ensure that display placement is changed, thermal shielding is
provided and/or additional ventilation is provided to keep the display within its
nominal operating parameters.