Systems Flat Panel Television User Manual
Table Of Contents
- Table of Contents
- Safety for You and the m40L/m46L
- Recommended Usage
- VESA Mounts, General Description
- Before You Begin
- Installation Checklist
- Unpacking and Checking Accessories
- Connecting Source Cables
- Connecting Power
- Connecting RS232 Communication
- Connecting RS232 Cables
- Using the Remote
- Selecting the Source
- Automatically Selecting the Source
- Manually Selecting the Source
- Adjusting Input Levels
- Adjusting Frequency and Phase
- Aspect Ratio Settings
- Adjusting Sharpness
- Adjusting Position
- Tiling a Display
- Zoom and Viewport
- Adjusting Color Balance
- Advanced Options
- Backlight Control
- Serial Port Settings and Diagnostics
- Saving and Recalling Configurations
- Checking Unit Status
- Where to Go From Here
- Downloading Additional Documentation and Firmware
- Downloading Utility Software
- m40L Dimensions
- m46L Dimensions
- Index
m40L/m46L Installation & Configuration Guide 95
Specifications
Mechanical Specifications
Specification m40L m46L Notes
Outside dimensions in/lbs mm/kg in/lbs mm/kg
Width
36” 923mm 43” 1094mm
Height
21” 536mm 25” 638mm
Depth
5” 126mm 5” 120mm with front shield, add 5mm
(m40L) or 5.25mm (m46L)
Weight
63lbs 29kg 84lbs 38kg with front shield, add 7lbs
(m40L) or 10lbs (m46L)
Shipping weight
74lbs 34kg 95lbs 43kg
Orientation vertical and horizontal
Display color charcoal gray
Rear clearance required .5” 12mm
Screen dimensions
Diagonal
40” 1016mm 46” 1168mm
Width
35” 885mm 40” 1018mm
Height
20” 497mm 23” 573mm
Aspect ratio 16:9 16:9
Pixel pitch 0.648mm x 0.648mm 0.530mm x 0.530mm
Electrical and Heat Specifications
Specification Maximum Minimum Typical Notes
Video input amplitude
Separate RGB Analog 1.0V p-p 0.5V p-p 0.7V p-p 75 ohm termination
Composite Analog 5.0V p-p 0.3V p-p 75 ohm termination
TTL H and V sync 5.0V 2.5V 3.5V TTL at 330 ohm termination
Input connectors
DVI-D x 1 Digital
15-pin HD D-sub x 1 Analog VGA