Systems Flat Panel Television User Manual
Table Of Contents
- Table of Contents
- Safety for You and the m40L/m46L
- Recommended Usage
- VESA Mounts, General Description
- Before You Begin
- Installation Checklist
- Unpacking and Checking Accessories
- Connecting Source Cables
- Connecting Power
- Connecting RS232 Communication
- Connecting RS232 Cables
- Using the Remote
- Selecting the Source
- Automatically Selecting the Source
- Manually Selecting the Source
- Adjusting Input Levels
- Adjusting Frequency and Phase
- Aspect Ratio Settings
- Adjusting Sharpness
- Adjusting Position
- Tiling a Display
- Zoom and Viewport
- Adjusting Color Balance
- Advanced Options
- Backlight Control
- Serial Port Settings and Diagnostics
- Saving and Recalling Configurations
- Checking Unit Status
- Where to Go From Here
- Downloading Additional Documentation and Firmware
- Downloading Utility Software
- m40L Dimensions
- m46L Dimensions
- Index

94 m40L/m46L Installation & Configuration Guide
Downloading Additional Documentation and Firmware
Some of the other documents for the m40L/m46L, which are or will be available from
the Technical Support Department website, are listed below:
1 Read the instructions listed under "Accessing Planar’s Technical Support Website"
on page 93.
2 Click m40L/m46L.
3 From the list, click to download additional documentation and firmware.
Downloading Utility Software
1 Read the instructions listed under "Accessing Planar’s Technical Support Website"
on page 93.
2 Click Utility Software.
3 From the list of available software, click on the tool you need.
For example, to control the m40L/m46L using RS232 commands, download Serial
Talk. You may also want to download “Using Serial Talk,” which is a document
that explains how to use Serial Talk.
Document Name Contents
Installation & Configuration
Guide (this manual)
Information for installers and technicians to
install and configure displays.
RS232 Reference Manual Technical information about the product, such
as display mode information and how to use
RS232 commands to control displays.










