Systems Flat Panel Television User's Manual

22 Planar PD520 Owner’s Operating Manual
PREL
I
MINA
R
Y
RS-232 Controller
Connection
Use a straight-through RS-232 cable with a 9-pin male connector to connect a
PC or home theater control/automation system (if present) to the SERVICE port
on the PD520; see
Figure 3-9.
For more information about using this connection, refer to Serial
Communications on page 45.
Figure 3-9. RS-232 Control System Connection
➤
Rear Panel
To PC or
Automation/
Control
System
DB-9
Male
Connector Pin Assignments:
2 Transmit Data
3Receive Data
5Ground
1, 4, 6, 7, 8, 9 Not Connected