Systems User's Guide Monitor Dome E4c

vi | Dome E4c Display
Unpacking and handling tips
The Dome E4c display is a precision instrument that requires proper
care to maintain adherence to specification. Unpack the display
carefully, then set up and handle the unit properly to avoid damage
to the LCD panel.
• Use both hands to grasp the display case when lifting it from
the shipping carton, but avoid touching the screen.
• Do not apply pressure to the screen or touch the screen with
bare fingers or objects. Pressure can affect image quality.
• Allow the display to warm to room temperature before turning it
on. Avoid sudden temperature changes in environment to prevent
condensation.
• Secure the display onto the Planar-supplied wall or cart mounting
hardware to ensure safety if you elect not to use the desk stand.
• Do not set up the display near strong light or heat sources.
• Do not block the vents on the display or install the display in a built-
in enclosure. Blocked vents cause excessive heat inside the display.
• Do not remove the back cover or disassemble the display. There are
no user-serviceable parts inside.
Shipping/storing the display
Keep the display in its shipping container until installation. Return the
display to its original container whenever you need to store the unit,
move it to another location, or return it for repair.