Systems User's Guide Monitor Dome E4c

8 | Dome E4c Display
Installing Dome CXtra
Bundled with the display system, the Dome CXtra software enhances
the functionality of the Dome E4c display with a range of value-added
services, such as DICOM calibration, error reporting, and backlight
saver. Network management of Dome displays running the Dome
CXtra software require the Enterprise Management Service for
Dome CXtra. For more information and instructions on installation,
refer to Dome CXtra User’s Guide.
Conserving energy use
You have two ways to lower energy usage when the display is idle:
• Dome CXtra Backlight Saver service (preferred)
• Screen Saver (set via Windows operating system)
Activate the power saver when you anticipate periods of inactivity,
such as at the end of the work day or work week. Once activated,
Backlight Saver (or Screen Saver) automatically turns the backlight off
during the period of inactivity. Backlight Saver and Screen Saver both
extend the life of the backlight and reduce the burn-in of images.
Do not use the Backlight Saver and Screen Saver concurrently.
Options available
The following options are available for the Dome E4c display.
• VESA (100 mm x 200 mm) wall-mounting kit
• Dome Surgery Review Cart
WARNING: Use only the mounting devices supplied by Planar to
attach the display to the wall unit or to the cart. Failure to use the
specified device or to follow the mounting instructions exactly
could be hazardous.
ex.book Page 8 Friday, January 13, 2006 1:04 PM