Systems Quick Reference LCD Flat Panel TV Dome E2c

Installing the Display Controller

To install the controller

1 Turn o your computer and all

peripherals. Disconnect all cables

from your computer. Leave the

power cord plugged into the

grounded outlet.

2 Remove the computer cover.

3 Remove any existing graphics card

and video signal cable, if necessary.

4 Remove the blank bracket from the

available PCI Express slot.

5 Insert the controller into the

slot, align the connector pins,

and press the board down until

it is  rmly seated.

6 Secure the mounting bracket.

7 Reattach the computer cover

and the peripherals.

Remove any existing graphics card and its driver from your computer

system before you install the controller and driver. Also disable any onboard

graphics capability on the motherboard. See safety precautions on page 2.

Open PCI Express slot

Blank bracket

Controller installed

020-0458-00A_3.indd 6020-0458-00A_3.indd 6 4/12/06 5:36:40 PM4/12/06 5:36:40 PM