User manual

16
As with any OSD setting, a change to the minimum brightness limit will be permanently stored and
will be unaffected by turning off the monitor power.
The minimum brightness limit will affect the minimum brightness of both the automatic brightness
control mode and the manual brightness control mode identically. Below is a graph showing the
impact of various minimum brightness limit settings on the automatic brightness control mode.
MMaaxxiimmuumm BBrriigghhttnneessss MMooddee
If a constant maximum brightness is desired, simply connect both the DIM_INPUT and the /EXT_DIM
inputs of connector J1 to ground. The monitor will then be set to the maximum brightness.
Alternatively, one may avoid the need to connect to the dimming connector by using the OSD to set
the minimum brightness limit to the maximum value of 62. This will set the minimum brightness to
typically 900 cd/m
2
, which is very close to the maximum brightness. The resulting monitor brightness
range of approximately 900 to 1050 cd/m
2
will yield brightness changes largely undetectable by the
end user.