User manual

11
HHooww ttoo UUssee tthhee OOSSDD MMeennuuss
1. Press the "Menu" button to pop up the on-screen menu and to select between the four main
menus.
2. Choose the adjustment items by pressing the "Select/Auto" button.
3. Adjust the value of the adjustment items by pressing the "+" or "-" button.
4. The OSD menu will automatically close if you have left it idle for a pre-set time.
OOnn--SSccrreeeenn DDiissppllaayy MMeennuuss
FFiirrsstt OOSSDD MMeennuu::
Auto-Adjustment
Contrast
Horizontal Position
Vertical Position
Frequency
Tracking
Minimum Brightness Limit
•• AAuuttoo--AAddjjuussttmmeenntt
Choose this function to obtain an optimum image.
•• CCoonnttrraasstt
This function allows the user to adjust the image crispness. Contrast adjusts the difference between
white and black shades.
•• HHoorriizzoonnttaall PPoossiittiioonn
Changes the horizontal position of the image.
•• VVeerrttiiccaall PPoossiittiioonn
Changes the vertical position of the image.
•• FFrreeqquueennccyy
Changes the display data frequency to match the frequency of the graphic card. If a vertical
flickering bar is seen, use this function to make an adjustment.
•• TTrraacckkiinngg
Synchronizes the signal timing of the display with the graphic card. If an unstable to flickering
image is seen, use this function to make an adjustment.