PXL2240MW Touch LED LCD Monitor USER'S GUIDE www.planar.
Content Operation Instructions...................................................................................................................................................1 Unpacking Instructions .................................................................................................................................................2 Safety Precautions.................................................................................................................................................
Operation Instructions Thank you for purchasing the PXL2240MW multi-touch LED monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This LED Monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation.
Unpacking Instructions Move the Touch LED LCD Monitor out of the package and take off the plastic bag and Polystyrene Foam. Pull the base from Parallel versus Panel to Vertical. Adjust the Panel between 4° leaning forward and 40° leaning backward. Safety Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit. Do: Turn off the product before cleaning.
Package Overview Touchscreen LED Monitor Power Cord VGA Signal Cable Audio-in Cable USB Cable (A to B) HDMI Cable User’s Guide 3
Front View of the Product ① ② ③ ④⑤⑥ ① OSD Turn On/ Off ② Volume Adjust/ Scroll Down/ Adjust Decrease ③ Preset Mode/ Scroll UP/ Adjust Increase ④ Input select/ Confirm Selection ⑤ LED Indicator ⑥ Power On/ Off * Hot keys Instructions please see “Using the OSD Menu” on page 7.
Rear View of the Product ① ① Power Input ② USB - Type A to B ③ Headphone Jack ④ Audio Input ⑤ HDMI input (HDMI 19 pin) ⑥ DVI Input (DVI 24 pin) ⑦ VGA Input (D-Sub 15 pin) ② 5 ③④ ⑤ ⑥ ⑦
Quick Installation 1. 2. 3. 4. 5. 6. Connect either VGA, DVI or HDMI Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. Connect the audio cable from audio output of computer to the audio input of the monitor. Connect the USB cable from the computer to the monitor. Connect power cord to a properly grounded AC outlet, and then to the monitor. Power-ON computer and then POWER-ON the monitor. Set the timing mode on your computer.
Basic Operation and Calibration/Reset Instructions Before using the Touch LED LCD Monitor: Connect external equipment properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the Touch LED LCD Monitor on/off: Press POWER button on the front. The power LED indicator light will be blue when the Touchscreen LED Monitor is on. Using the OSD Menu Use OSD menus to adjust settings by using the menu button on the front of the Touchscreen LED Monitor.
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the 1 button and the ▼ button for 3 seconds to lock all 5 buttons. The Touchscreen LED Monitor will show a “Power Button Locked” message for 3 seconds and the message will disappear automatically. Repeat this step to unlock. PXL2240MW Calibration/Reset Instructions: The PXL2240MW is available with USB connection.
Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your Touchscreen LED Monitor. Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu. Short Cuts Function from the button(s) Auto Image Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. Contrast: To adjust the foreground white level of screen image. ▲: increase contrast, ▼: decrease contrast.
Input Select: When Input Select is pressed, change Input signal to VGA, DVI, HDMI or Auto. Audio Adjust: To adjust the audio functions. Volume: To adjust the volume of speaker output. Mute: To turn the Mute ON/OFF. Audio Input: When in HDMI input, select where the audio source comes from Line-In or HDMI. Color Adjust: To select the color for improving brightness and color saturation between Cool, Normal, Warm, User Color and Preset Mode. Cool: Adds blue to screen image for cooler white.
Sharpness: To adjust the clarity of a non-Full HD Resolution (1920x1080) signal with ▼ or ▲ button. Video Mode Adjust: To select the video mode from Full Screen or Aspect Ratio. Full Screen: To select full-screen size image. Aspect Ratio: To select input timing image size. Setup Menu: To set up Language Select, OSD Position, OSD Time Out, OSD Background and Power Indicator. Language Select: To allow users to choose from available languages.
Supporting Timing Modes STANDARD VGA VGA MAC VESA VESA VESA VESA VESA VESA MAC VESA VESA VESA VESA VESA MAC VESA VESA VESA CVT VESA VESA VESA RESOLUTION 720 x 400 @ 70Hz 640 x 480 @ 60Hz 640 x 480 @ 67Hz 640 x 480 @ 72Hz 640 x 480 @ 75Hz 800 x 600 @ 56Hz 800 x 600 @ 60Hz 800 x 600 @ 72Hz 800 x 600 @ 75Hz 832 x 624 @ 75Hz 1024 x 768 @ 60Hz 1024 x 768 @ 70Hz 1024 x 768 @ 75Hz 1280 x 960 @ 60Hz 1152 x 864 @ 75Hz 1152 x 870 @ 75Hz 1280 x 1024 @ 60Hz 1280 x 1024 @ 75Hz 1440 x 900 @ 60Hz 1400 x 1050 @ 60Hz 1600
Technical Information Panel 21.5” TFT (with LED backlight) Power Management On: 24 Watts (typical), 35 Watts (maximum) Standby Mode: < 0.5 Watt Off: < 0.5 Watt Displayable Resolution Full HD 1920 x 1080 max. Vertical Frequency 60Hz max. Pixel Dimension 0.24825 x 0.24825 mm Display Color 16.7M Tilt 4° (+3/-3) ~ 40° (+3/-3) Active Display Area 476.64 mm x 268.
Wall-Mount Installation Instructions Wall Mount Arm not included Turn the power OFF then disconnect the cables from the TFT Touchscreen LCD Monitor before performing the procedure below. 1. Lay the TFT Touchscreen LCD Monitor face down on a soft surface. 2. Remove the 2 screws holding the stand to the hinge. 3. Remove the stand. 4. Follow instructions included with the Wall Mount Kit. NOTE 100mmx100mm VESA hole pattern (n=4), M4, pitch =0.
Troubleshooting No power Make sure A/C power cord is securely connected to the power adapter and the power supply is firmly connected to the Touchscreen LED Monitor. Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage. Make sure all signal cables are installed. Power on but no screen image Make sure the video cable supplied with the Touchscreen LED Monitor is tightly secured to the video output port on back of the computer. If not, tightly secure it.
Planar Support Cables and Accessories To find cables and accessories for your Planar monitor, touch screen or other Planar products visit our online store at www.PlanarOnline.com. Technical Support Visit Planar at http://www.planar.com/support for operations manuals, touchscreen drivers, warranty information and access to Planar's Technical Library for online trouble shooting.
2013 2001132404T 020-1221-00A
