User`s guide

The OSD (On-Screen Display) Menu22
Option Menu
Name Description
Aspect ratio
Displays the input image in its original aspect ratio (when Original is selected)
or forces the display to fill the input image on the entire display area (when Full
is selected).
PIP (Picture in
Picture)
• ON/OFF: Turns on or off the PIP function.
• Main Input: Sets an input source for the main picture.
• Sub Input: Sets an input source for the sub picture.
• PIP Size: Changes the size of the sub picture.
• PIP Position: Changes the position of the sub picture.
Notes:
• This feature is not available for AV and S-Video inputs.
• PIP is not available for all signal source combinations. See "Supported
PIP Input Signal Combination" on page 30 for more information on
supported combinations.
• In PIP mode, only sounds from the Main Input picture will be available.
Video Source Sets the video input source.
Auto Adjustment Automatically optimizes image display for the VGA input.
Clock Frequency Adjusts the clock frequency of the VGA or YPbPr input image.
Phase Adjusts the phase of the VGA or YPbPr input image.
H Position Adjusts the horizontal position of the VGA input image.
V Position Adjusts the vertical position of the VGA input image.
Ambient Light
Sensor
Adjusts the ambient light sensitivity around the display.
Auto Detection Automatically detects available input sources.
Note: The adjustment of the Clock Frequency, Phase, H Position and V Position settings is
only required when the Auto Adjustment function does not work perfectly on certain input
signals.
Aspect ratio Full
PIP
Video Source YPbPr
Auto Adjustment
Clock Frequency 16
Phase 22
H Position
V Position
Ambient Light Sensor OFF
Auto Detection ON
Option
:Move
:Input
:Exit
Enter
Exit