User`s guide

The OSD (On-Screen Display) Menu20
Picture Menu
Name Description
Picture Mode Sets the display mode.
Contrast Adjusts the image contrast when Picture Mode is set to User.
Brightness Adjusts the image brightness when Picture Mode is set to User.
Color Adjusts the color intensity when Picture Mode is set to User.
Tint Adjusts the color tint when Picture Mode is set to User.
Sharpness Adjusts the image sharpness when Picture Mode is set to User.
Backlight
Adjusts the backlight intensity for the screen.
Note: This feature is not available if the Ambient Light Sensor function is
set to HIGH or LOW.
DCR
Turns the DCR function on or off. This feature enhances image contrast for dark
scenes.
Note: This feature is not available if the Ambient Light Sensor function is
set to HIGH or LOW.
Color Temp Adjusts the color temperature.
Input Resolution
Sets the VGA input resolution. This is only required when the display cannot
detect the resolution correctly.
Adjusting the Contrast
1. Set the contrast to the highest level.
2. Gradually decrease the contrast level until you reach the point where the details in the bright
areas of the image can be seen clearly. Do not further decrease the contrast level to avoid losing
the saturation of colors.
Adjusting the Brightness
1. Set the brightness to the lowest level.
2. Gradually increase the brightness level until you reach the point where the details in the dark
areas of the image can be seen clearly. Do not further increase the brightness level to avoid the
black areas from looking grayish.
Picture Mode Standard
Contrast 88
Brightness 43
Color 55
Tint 50
Sharpness 5
Backlight 5
DCR OFF
Color temp.
9300 K
Input Resolution Auto
:Move
:Input
:Exit
Picture
Enter
Exit