User`s guide

Setting Up the Display 13
Connecting the AV and S-Video Inputs
1. Connect the VIDEO IN (S-VIDEO) or VIDEO IN jack on the display to the output jack on an
A/V device (such as a VCR) using an appropriate video cable.
2. Connect the VCR’s audio output jacks to the AUDIO IN (AUDIO2 or AUDIO3) jacks on the
display using a suitable audio cable.
3. If a second display is used, connect the VIDEO-OUT jack on the first display to the VIDEO IN
jack on the second display using an AV cable. This relays the input signal from the first
display to the second one.
4. To view video image from this input, press the
AV button on the remote control for the AV
signal, or press the
INPUT button repeatedly for the S-Video signal.
First display
Second display
AV cable
Audio cable
DVD player / VCR
AV cable
S-Video cable
*The cables are not supplied and should be purchased separately.
Note:
Connector locations on the control panel may differ depending on the model.