Installation guide

RS232 Commands
32 Planar UltraLux Series Installation Guide
10 Set Color Temp to
"4200K"
08 22 04 00 00 00 02 D0 color temp set to commanded
value
11 Set Color Temp to
"5000K"
08 22 04 00 00 00 03 CF color temp set to commanded
value
12
Set Color Temp to
"6500K"
08 22 04 00 00 00 04 CE color temp set to commanded
value
13
Set Color Temp to
"7500K"
08 22 04 00 00 00 05 CD color temp set to commanded
value
14 Set Color Temp to
"9300K"
08 22 04 00 00 00 06 CC color temp set to commanded
value
15 Get Color Temp 04 21 0B D0 returns "Color Temp = value"
where value is 2 for 4200K, 3 for
5000K, 4 for 6500K, 5 for 7500K,
6 for 9300K
16 Set Red to "X" (0 to 100) Set to 50: 08 22 0E 00 00
00 32 96
red set to commanded value
(use the Red/Green/Blue set
commands to get custom color
temperatures)
17 Get Red 04 21 0C CF returns "Red Color = value"
18 Set Green to "X" (0 to
100)
Set to 20: 08 22 0F 00 00
00 14 B3
green set to commanded value
19 Get Green 04 21 0D CE returns "Green Color = value"
20 Set Blue to "X" (0 to
100)
Set to 80: 08 22 10 00 00
00 50 76
blue set to commanded value
21 Get Blue 04 21 0E CD returns "Blue Color = value"
22 Set Input to
"DisplayPort"
08 22 02 00 00 00 00 D4 set the input source to DP, which
becomes the default source
23
Set Input to "HDMI" 08 22 05 00 00 00 00 D1 set the input source to HDMI,
which becomes the default
source
24 Set Input to "VGA" 08 22 06 00 00 00 00 D0 Set the input source to VGA,
which becomes the default
source
25 Set Volume to "X" (0-
100)
Set to 100: 08 22 09 00 00
00 64 69
Speaker volume set to
commanded volume
26
Get Volume 04 21 0F CC returns "Volume = value"
27 Set Mute to "on" 08 22 0A 00 00 00 01 CB activates Mute, for no audio
(note that this setting is not
saved when hard power is
turned off)