User's Manual

Setting Up Email Alerts
EP Series Ultra HD LCD Displays User Guide
020-1350-01D
Page | 68
Setting Up Email Alerts
The web service allows you to configure the settings required to send email alerts. If you are not
using email alerts, you do not need to use the web service and can skip this section.
Note: Depending on the unit's hardware configuration, the web server may look different than the
pictures shown in the following sections. However, the functionality is identical.
30. Login
When you direct your browser to the network IP address of the display, you are prompted to login
as shown here.
The default ID is admin . The default password depends on the firmware version of your display.
The Information menu (see section 24 on page 56) lists all of the display's firmware versions.
 If the NetUart version is v2040 or later, the default password is the display's serial
number. This can also be obtained from the Information menu.
 If the NetUart version is v2039 or earlier, the default password is system .
Note: Cookies and JavaScript must be enabled in your browser.
Note: If your session times out or if you enter an incorrect ID or password, you will see the
following message.