User's Manual

Operating the Display
Page | 49
EP Series Ultra HD LCD Displays User Guide
020-1350-01D
22. Advanced Setup Menu
Smart Light Control
 Enable dynamic contrast (DCR) or ambient light sensor
 Options: Off, DCR, Light Sensor
 Default: Off
Pixel Orbit
 Create slight frame motion to help avoid image retention
 Options: On, Off
 Default: Off
MEMC
 Enable motion estimation motion compensation (frame interpolation). This improves smoothness
for fast motion video content.
 Options: Off, Low, Medium, High
 Default: Off
Power Saving Config
 Options: Standby Mode, Networked Standby Mode, Wake on All, Always On
 Default: Standby Mode
 Note: For Standby Mode, Networked Standby Mode and Wake on All, the display will enter
power saving mode if no signal is received for 5 minutes.
 Note: The LAN connection will not work in standby if Standby Mode is selected. Use one of the
other modes to enable LAN support in standby.
DP1 Ver.
 Select the DisplayPort version of the DP1 input
 Options: 1.1, 1.2
 Default: 1.2
 Note: DisplayPort 1.2 is the more modern standard and supports 3840x2160 @ 60 Hz
resolution. However, sometimes DisplayPort 1.1 is needed for compatibility with older
graphics cards.