User's Manual

Installing the Display
Page | 21
EP Series Ultra HD LCD Displays User Guide
020-1350-01D
9. Installing OPS Expansion (Optional)
The Planar EP Series displays are equipped with an expansion slot that supports the Intel ®
Open-Pluggable Specification (OPS). The slot will support OPS devices such as PC’s, SDI
modules etc.
To install an OPS device, remove the protective cover on the display and slide the device firmly
into position. When installed, the OPS device will be connected internally to the display. No
external video or power cables are required.
For convenience, two Type-A USB 2.0 ports and one Type-A USB 3.0 port are provided on the
rear cover of the display. When an OPS device is installed, these USB ports can be used for a
keyboard, webcam, USB drive, or other peripherals.