User's Manual

Introduction
EP Series Ultra HD LCD Displays User Guide
020-1350-01D
Page | 13
4. VESA Mounts, General Description
VESA mounts are used to secure the Planar EP Series for display. The display can be installed
using a variety of VESA mounts available through Planar. If you do not have a VESA mount and
would like to purchase one, contact Planar.
If you purchased a VESA mount, you should have a received a separate box with mounting
supplies and an Installation manual. Follow these instructions carefully.
Keep in mind the following general installation guidelines:
• Screw length is crucial and will vary depending on the type of mount you use. Total screw
length will include the penetration length plus the length required by the type of VESA
mount in use.
• Mount spacers may be required to accommodate the protruding back panel of the OPS
slot.
Caution: Shorter screws will result in insufficient mounting strength and longer screws could
puncture parts inside the display.
• Prior to installation, make sure you know where all of the mounting points are located.
• Follow all safety precautions outlined in the VESA Installation manual.
• Verify the parts received with the list shown in the VESA Installation manual.