| Content Operation Instructions .. Unpacking Instructions Safely Protrusions IEEE airs sissies sissies Consigned de security Package Overview First Setup Front View of the Product... Rear View of the Product Quick Installation Basic Operation . OSD Menu .. Supporting Timing Modes Technical Information...
| Operation Instructions Thank you for purchasing the PXN2430MW LED LCD monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This LED LCD Monitor has been tested and found compliant with the lime for a Class B digital device, pursuant to part 15 of the FCC Rules. Tess limits are designed to provide proper protection against harmful Interference to a residential Installation.
‘COMMUNIQUE D'AVERTISSEMENT DE LA FCC CONCERNANT LES INTERFÉRENCE DE fréquence RADIO: (SEULEMENT POUR MODELÉS CERTIFIE PAR LA FCC) Ce moniteur a &té testé et A été trouvé conforme aux limites pour un appareil numérique de Glass B, suivant la partie 15 des réglemente de la FCC. Ces limites ont été développées pour offrir une protection satisfaisante contre les interférences nuisibles dans une installation résidentielle. Ce moniteur généré, utilise et peut radier de I'énergie de fréquence radio.
| Unpacking Instructions # Remove the LED LCD Monitor out of the package and take off EPE Foam. ® Remove bass from EPE Foam and attach to base. & Adjust the display between -5" and 15°. | Safety Precautions Follow all wakings, precautions and maintenance as recommended in this user's manual to maximize the life of your unit. Tum off the product before cleaning.
| Consignes de sécurité Respectez tous les avertissements, les précautions et conseils d'entretien recommandés dans ce manuel de l'utilisateur pour maximiser la durée de vie de votre appareil. A faire: ® Éteindre le produit avant de le nettoyer.
| First Setup Install the Stand Base 1. Lay the LED LCD Monitor flat on a table with the LED screen face down. To prevent the LED LCD Monitor from being scratched, put a pies of soft cloth on the table on which the screen will be set. 2. Insert Bass into the monitor as shown below. 3. Stand the LED LCD Monitor up Disconnecting the Stand Base 1. Lathe LED LCD Monitor flat on a table with the LED screen face down.
| Front View of the Product J ee) DIDO Menu / Exit Bite Light Reducer / Down Brightness / Un Input select | Enter Power On | Off LED Indicator *Hot keys Instructions please sae "Basic Operation” on pagan.
| Rear View of the Product @ FLAMER rh ® Power Input (OC input) DV Input PIN) HDMI input (HOM 18 pin) Dis Alpert Input (Disproportional 20 pin) Audio Input secs
| Quick Installation 1. Connect either DVI, HDMI or Display Port Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. Please notch. The monitor ships with Display Port and HDMI cables only. Connect power adapter to DC input of the monitor. Connect power cord to a properly grounded AC outlet, and then to the adapter. Power-ON computer and then POWER-ON the monitor. Set the timing mode on your computer.
| Basic Operation Before using the LED LCD Monitor: @ Connect external equipment properly. ® Insert the power plug, and the power LED indicator will light orange. Power On/Off To tun the LED LCD Monitor on/off: Press ¢ button on the front. The power LED Indicator light will be blue when the LED LCD Monitor is on. Using the OSD Menu Use OSD menus to adjust settings by using the menu button on the front of the LED LCD Monitor.
08D lock Out Function When LED LCD Monitor is in normal mode, the “OSD Lock Out” function can be enabled. Option 1: OSD lock-all 4 buttons are locked except the “POWER” button. Press and hold the button [for § seconds to lock the OSD buttons. The LED LCD Monitor will show an “OSD button locked” message for 5 seconds and the message will disappear automatically. 0SD BUTTON LOCKED Repeat this step fo unlock. Option 2: OSD & Power button lock-all 5 buttons including the “POWER” button are locked.
| OSD Menu PICTURE BRIGHTNESS Adjust between 0-100. CONTRAST Adjust between 0-100. SHARPNESS Adjust between 1-4.
COLOR COLOR EFFECT Select between Standard, Game, Movie, Photo, Vivid. SATURATION Select Adjust between 0-100. GAMMA Select between Off, TEMPERATURE Select between 6500, 5400, SR, User, 9300. Under user, the following colors can be adjusted. R 0-255 6 0-255 B 0-255 Blue Light Reducer Select between Off, Video (15% reduction), Web Browsing (30% reduction), Reading (50% reduction), Low light (70% reduction).
ADVANCE VOLUME Select between 0~100 MUTE Tum On or Off AUDIO SOURCE Select between Analog, Digital. OVER DRIVER Tum On or Off. INPUT Select between DVI, HDMI, DP.
sp = LANGUAGE Select between English, French, German, Italian, Spanish, Finnish, Japanese, Simplified Chinese, Traditional Chinese. ° MENU TIME Adjust between 10 60 secs. * OSD POSTILION Adjust between 0 (Left) to 100 (Right). * PROSODY POTION Adjust between 0 (Up) fo 100 (Down). ° TRANSPARENCY Adjust between 0 (Solid) to 100 (Transparent).
| Wall-Mount Installation Instructions Preparing to Install the Optional Wall Mount Arm (not Included) This LED LCD Monitor can be attached to a wall mounting arm purchased separately. Tum the power OFF then disconnect the cables from the LED LCD Monitor before performing the procedure below. 1. Lay LED LCD Monitor face down on a soft surface 2. Remove the 4 screw and pull stand away from monitor. 3. Remove the stand base.
| Care and Maintenance Care « Av old exposing your LED LCD monitor directly to sunlight of other heat source. Pace your LED LCD monitor away from the sun to reduce gars. + Put your LED LCD monitor in a well ventilated area. « Do net place any heavy things on top of your LED LCD mentor. « Make certain your LED LCD monitor Is Installed In a clean and moisture-frse area. ~ Keep your LED LGD monitor away from magnets, motors, transformers, speakers and TV sets.
| Planar Support Gables and Accessories To find cables and accessories for your Planar monitor, touch screen or other Planar products visit our online store at www.PlanarOnline.com. Technical Support Visit Planar at for operations manuals, touchscreen drivers, warranty information and access to Planar's Technical Library for online trouble shooting.
Planar Systems, Inc. Customer Service 24x7 Online Technical Support 1185 NE Compton Drive, Stillborn, OR 97006 Tel: 1-866-PLANAR (866-752-6271), or + 1 503-748-5729 outside the United States, Hours: 24 hours a day, 7 days a week ©2018 Planar Systems, Inc. Planar is a registered trademark of Planar Systems, Inc. Other brands and names are the property of their respective owners. Technical information in this document is subject to change without notice.
