User Guide

First Setup
6
Install the stand base
1. Lay the
LED LCD Monitor
flat on a table with the LED screen face down. To prevent the LED
LCD Monitor from being scratched, put a piece of soft cloth on the table on which the screen
will be set.
2. Insert Stand and Base into the monitor as shown below.
3. Stand the
LED LCD Monitor
up.
Disconnecting the stand base
1. Lay the
LED LCD Monitor
flat on a table with the
LED
screen face down. To prevent the
LED
LCD Monitor
from being scratched, put a piece of soft cloth on the table on which the screen
will be set.
2. Push release button and pull stand away from monitor.
Release button
3. Press the tenons inwardly and pull the base from stand to remove.