PCT2785 Touch LED LCD Monitor USER'S GUIDE www.planar.
Content Operation Instructions...................................................................................................................................................1 Unpacking Instructions .................................................................................................................................................2 Safety Precautions.................................................................................................................................................
Operation Instructions Thank you for purchasing the PCT2785 multi-touch, edge-lit LED LCD monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This LED Monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation.
Unpacking Instructions Remove the Touch LED LCD Monitor out of the package and take off the plastic bag and Polystyrene Foam. Pull the base from Parallel versus Panel to Vertical. Adjust the Panel between 15° leaning forward and 70° leaning backward. Safety Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit. Do: Turn off the product before cleaning.
Package Overview Touch LED LCD Monitor Power Cord VGA Signal Cable Audio-in Cable USB Cable (A to B) HDMI Cable Touch Pen User’s Guide Cleaning Cloth 3
Front View of the Product ① ② ③ ① Webcam LED indicator ② Webcam ③ Microphone ④ Input select/ OSD Turn Off ⑤ Scroll Down/ Adjust Decrease * ⑥ OSD Turn On, Confirm Selection ⑦ Scroll UP/ Adjust Increase * ⑧ Power On/ Off/ LED Indicator * Hot keys Instructions please see “Using the OSD Menu” on page 8.
Rear View of the Product ① ②③④ ⑤⑥ ⑦ ⑧ ⑨ ① Power Input ② Up-stream USB port (to PC) ③ USB port-A (support USB 2.0 plug play device) ④ USB port-B (support USB 2.
Quick Installation 1. 2. 3. 4. 5. 6. Connect either VGA, HDMI or DisplayPort Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. Please note. The monitor ships with only VGA and HDMI cables. DisplayPort cable may be sourced separately from a cable supplier. Connect the audio cable from audio output of computer to the audio input of the monitor. Connect the USB cable from the computer to the monitor.
Webcam Installation 1. 2. 3. 4. 5. Download the free “Instant messaging software” such as MSN Messenger, Yahoo Messenger, or Skype from the Internet. Complete the installation. Use the USB 2.0 cable (included with the monitor) to connect the monitor to one of the USB 2.0 ports of the computer. Windows will automatically search for the camera, and proceed with the installation of the driver.
Basic Operation and Calibration/Reset Instructions Before using the Touch LED LCD Monitor: Connect external equipment properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the Touch LED LCD Monitor on/off: Press button on the front. The power LED indicator light will be blue when the Touch LED LCD Monitor is on. Using the OSD Menu Use OSD menus to adjust settings by using the menu button on the front of the Touch LED LCD Monitor.
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the button and the button for 5 seconds to lock all 5 buttons. The Touch LED LCD Monitor will show a “Locking Power Button” message for 3 seconds and the message will disappear automatically. Repeat this step to unlock. PCT2785 Calibration/Reset Instructions: The PCT2785 is available with USB connection.
Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your Touch LED LCD Monitor. Press the button to display the OSD Menu, and use or to select the desired OSD menu. Short Cuts Function from the button(s) Auto Image Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. Contrast: To adjust the foreground white level of screen image. : increase contrast, : decrease contrast.
Audio Adjust: To adjust the audio functions. Volume: To adjust the volume of speaker output. Mute: To turn the Mute ON/OFF. Audio: When in HDMI input, select where the audio source comes from Line-In or HDMI. DisplayPort Audio: When in DisplayPort input, select where the audio source comes from Line-In or Display Port. Color Adjust: To select the color for improving brightness and color saturation between Cool, Normal, Warm, User Color, and Picture Mode. Cool: Adds blue to screen image for cooler white.
Video Mode Adjust: To select the video mode from Full Screen, Over Screen or Aspect Ratio. Full Screen: To select full-screen size image. Over Screen: To select over-screen size image. Warning: “Over Screen” may cause deviation in touch accuracy. If this occurs, we recommend using “Full screen”. Aspect Ratio: To select input timing image size. Setup Menu: To set up Language Select, OSD Position, OSD Time Out, OSD Background and LED mode. Language Select: To allow users to choose from available languages.
Supporting Timing Modes STANDARD VGA VGA MAC VESA VESA VESA VESA VESA VESA MAC VESA VESA VESA VESA VESA MAC VESA VESA VESA CVT VESA VESA VESA RESOLUTION 720 x 400 @ 70Hz 640 x 480 @ 60Hz 640 x 480 @ 67Hz 640 x 480 @ 72Hz 640 x 480 @ 75Hz 800 x 600 @ 56Hz 800 x 600 @ 60Hz 800 x 600 @ 72Hz 800 x 600 @ 75Hz 832 x 624 @ 75Hz 1024 x 768 @ 60Hz 1024 x 768 @ 70Hz 1024 x 768 @ 75Hz 1280 x 960 @ 60Hz 1152 x 864 @ 75Hz 1152 x 870 @ 75Hz 1280 x 1024 @ 60Hz 1280 x 1024 @ 75Hz 1440 x 900 @ 60Hz 1400 x 1050 @ 60Hz 1600
Technical Information Panel 27” TFT (with LED backlight) Power Management On: 43 Watts (typical), 65 Watts (maximum) Standby Mode: < 0.5 Watt Off: < 0.5 Watt Displayable Resolution Full HD 1920 x 1080 max. Vertical Frequency 60Hz max. Pixel Dimension 0.31125 x 0.31125 mm Display Color 16.7M Tilt 15° to 70° Active Display Area 597.6 mm x 336.
Wall-Mount Installation Instructions Wall Mount Arm not included Turn the power OFF then disconnect the cables from the Touch LED LCD Monitor before performing the procedure below. 1. Lay the Touch LED LCD Monitor face down on a soft surface. 2. Follow instructions included with the Wall Mount kit. NOTE 100mmx100mm VESA hole pattern (n=4), M4, pitch =0.
Troubleshooting No power Make sure A/C power cord is securely connected to the power adapter and the power supply is firmly connected to the Touch LED LCD Monitor. Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage. Make sure all signal cables are installed. Power on but no screen image Make sure the video cable supplied with the Touch LED LCD Monitor is tightly secured to the video output port on back of the computer. If not, tightly secure it.
Planar Support Cables, Replacement Lamps, Accessories To find cables, replacement lamps and accessories for your Planar projector, monitor, touch screen or other Planar products visit our online store at www.PlanarOnline.com or find other stores who carry Planar products at http://www.planar.com/howtobuy Technical Support Visit Planar at http://www.planar.com/support for product registration, operations manuals, warranty information and access to Planar's Technical Library for online troubleshooting.
12 2001132377P 020-1193-00A
