User Manual

Pknight®ATD 1024Epro
Setting
Introduction:
Artnet-Dmx Configurator
is a free Windows
application that is used to manage compatible
DMX over Ethernet nodes.
The application(in the
USB ash disk
) will help you
find your unit's IP address and then you can set it
up easily.
Please follow these steps:
1.Ensure that your ATD 1024Epro is hooked up
physically by an Ethernet cable
2.And connected to the same physical network (or
router) as the computer on which you will run
Artnet-Dmx Configurator.
3.Copy the application file in the usb
ash disk
to
the computer and open it,Then Press the Search
button, and wait till the application finds all
supported node devices on your network.A view
will appear similar to the following figure.
Pknight
®
Artnet-dmx 1024Epro Page 7