User Manual
Pknight®ATD 1024Epro
Setting
Pknight
®
Artnet-dmx 1024Epro Page 11
5
Frame Rate
at which ATD 1024Epro will output the Data
from DMX port (35 Frames per second is default). It also can
be customized from 0-40
6
Unicast
is only available when port is set to
Input
. Any
valid IP address can be used to Unicast DMX.Send DMX to a
single IP address rather than broadcast.
Using the IP address one can access the built-in web-
interface inside the ATD 1024Epro via any modern
web-browser. The webinterface allows the settings of
the unit to be changed.
1.If the default ip of ATD 1024Epro is 2.3.201.8,we
can Manually enter ip 2.48.18.115 and subnet mask
255.0.0.0 for our computer.
ensure any ip starting with 2 and the remaining three
numbers are between 0 and 255, and the ip is not the
same as the ATD 1024Epro, It's good to go!
Web Conguration