User Manual

Pknight®ATD 1024Epro
Setting
Pknight
®
Artnet-dmx 1024Epro Page 10
1
DMX 1 UNIVERSE
is the dmx1 port of the corresponding
controller panel,
DMX 2 UNIVERSE
is the dmx2 port of
the corresponding controller panel
4
OFF :by default
HTP :
Highest Takes Precedence. Channels are compared
one to one and the highest value is set on the output
LTP :
Latest Takes Precedence. The latest source is used as
the output.
Backup:
Only one source at a time,the latest source Takes
Precedence,and the rest will be backup.multiple sources will
cause a conflict and the output might have unexpected
data,so
it is strongly recommended
2
Output:
Artnet to DMX Output
Input:
DMX Input to Artnet
Read-only and can not be modified. We can
only go by setting the dial Switch on the panel
3
dmx port 1 listening to the first Art-Net Universe 0
dmx port 2 listening to the first Art-Net Universe 1
(Factory Default Set).
Here you can customize