Instructions

27
➢ PCB is defective.
➢ Plug is defective.
LCD indicates error .
➢ LED is defective.
➢ Temperature cannot be determined.
➢ Contact the aftersales service.
Unusual noise.
➢ The appliance is not installed on a
level, dry and solid floor.
➢ The appliance is in contact with a
wall or another item. The bottles are
incorrectly positioned.
➢ Some items have dropped behind
the appliance.
➢ Realign the appliance.
➢ Readjust the appliance.
➢ Realign the bottles
➢ Remove these items.
The door does not close properly.
➢ The appliance is not installed on a
level, dry and solid floor.
➢ Door seal is defective.
➢ Shelves are not inserted properly.
➢ Realign the appliance.
➢ Replace the door seal.
➢ Insert the shelves properly.
Control buttons do not work.
➢ Control panel is defective.
➢ Contact the aftersales service.
➢ If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the shop you purchased the appliance at.
The operating procedures described below are normal
and do not indicate a malfunction.
➢ The refrigerant generates a sound similar to flowing water.
➢ Sometimes you may hear a sound which is generated by the injection process of
the cooling circuit.
➢ The sides of the appliance may get warm while the appliance is running.
Distinct noise
When you run the appliance for the first time or the temperature falls below a
certain level the appliance will operate with high power to reach the preset
temperature.
Condensed water in/on the appliance
may be generated inside or outside the appliance by high humidity or very warm
ambient temperatures.
Clicking
You will hear the compressor click when it is activated or deactivated.