Instructions

23
Temperature setting
➢ Set the temperature using the ▲ and ▼ buttons by 1
0
within a range of 5
0
to
18
0
.
➢ Switch on/off the internal light using the LIGHT-button.
➢ Select degrees Celsius or degrees Fahrenheit using the
0
C/
0
F-button
➢ Flashing LCD = Setting mode of the temperature.
➢ Constant LCD = Cooling temperature.
Operation parameters
1. The appliance can only reach the relevant temperatures when:
a. the a ambient temperature meets the climatic class.
b. the doors close properly.
c. you do not open the doors too often or too long.
d. the door seals are in proper condition.
e. the appliance is properly positioned.
f. you have not overfilled the appliance.
g. you do not store warm or hot food in the appliance.
2. High ambient temperatures and simultaneously operating at the coldest setting
may make the compressor operate permanently to keep the temperature
constant inside the appliance.
Helpful hints/energy saving
❖ Try opening the door as little as possible, especially when the weather is warm
and humid. When you open the door, close it as soon as possible.
❖ Permanently check , if the appliance is well-ventilated. The appliance has to be
well-ventilated from all sides.
❖ Disconnect the appliance from the mains if you do not operate it.
❖ Always keep the door seals clean and in a proper condition.
Replacing of the illuminant
WARNING! The LED-illuminant must be replaced by a
competent person only. If the LED-illuminant is damaged, please
contact a qualified professional (not covered by the guarantee).
NOTICE! This product contains a LED light source of energy
efficiency class G according to EU-Regulation 2019/2015.