Instructions

22
4
OPERATION
4
1.
NTC-pointt
2.
Light switch
3.
Temperature display
4.
Lightt
5.
Temperature switch
6.
Temperature setting
7.
Fan
8.
Exhaust window
9.
Shelf
10.
Housing
11.
Hinge
12.
Foot
13.
Glass pane
14.
Door seal
15.
Handle
16.
Lower hinge
Before initial operation
1. Leave the appliance in an upright position for 4-6 hours before you connect it
to the mains.
2. Clean the appliance thoroughly. Be very careful especially inside the appliance
(look at chapter CLEANING AND MAINTENANCE).
3. If the accessories inside the appliance are not fitted in their correct position,
replace them according to the image in chapter 4.
4. The appliance must be connected to the mains properly.
5. Allow the appliance to stabilize the temperature for approx. 24 h before use.
6. Do not overfill the appliance