Instructions

100
2. Now unscrew the water valve (C) of the water
tank (anticlockwise).
3. First, push the connector / flange of the cover
of the water tank on one side of the water
tank upwards slightly and carefully to separate
the cover of the water tank (D) from the
water tank (E) itself. Then repeat the
procedure on the other side of the water tank.
Remove the cover from the water tank.
4. Clean all parts (water tank, cover of the water tank, water valve) using hot soapy
water. Rinse well using clear water and dry all parts thoroughly.
5. It is recommended to clean the water dispenser, water tank, cover of the water
tank and water valve at least once per month in this way.
1. Screw the water valve (C) onto the water tank
properly again (clockwise).
2. Reinstall the cover (D) of the water tank (E)
properly again: Put one side of the cover on
the water tank first and then the other side.
Push the edges of the cover on the water tank
firmly but carefully.
HOW TO REINSERT THE WATER TANK: