Instructions

~ 59 ~
WHEN THE COOKING PROCESS IS FINISHED
1. When the cooking process is finished, the display indicates « End » and an
acoustic signal sounds every 2 minutes.
2. Press the button « STOP / CANCEL » or open the door of the appliance to stop
the acoustic signal.
4.3 Setting of the clock
❖ When you connect the appliance to the mains for the first time, an acoustic signal
sounds and the display indicates « 1:01 » and the following symbol: « ». The
appliance is in STANDBY MODE.
❖ You can select a 12-hour or 24-hour display. To set the current time, proceed
as follows.
1. The appliance must be in STAND-BY MODE.
Press the button « CLOCK / PRESET » to set a
12-hour or 24-hour display:
➢ press once = 12-hour display
➢ press twice = 24-hour display
STAND-BY MODE
BUTTON
« CLOCK / PRESET »
2. Set the hours of the current time using the
rotary knob « TIME / MENU » (0 - 23 or 0 - 12
hours).
ROTARY KNOB
« TIME / MENU »
3. Press the button « CLOCK / PRESET »
BUTTON
« CLOCK / PRESET »
4. Set the minutes of the current time using the
rotary knob « TIME / MENU » (0 - 59 minutes).
ROTARY KNOB
« TIME / MENU »
5. Press the button « CLOCK / PRESET » again to
confirm the setting.
BUTTON
« CLOCK / PRESET »
If you press the button « CLOCK / PRESET » during a cooking process, the current
time is indicated on the display.
NOTICE! The clock must be set in order that the appliance works properly.