Instructions

31
1. The piece of furniture the appliance is intended to be built-in must not be
equipped with a back wall behind the appliance.
2. The minimum installation height is 85 cm.
3. Never cover the ventilation openings and air inlet points.
2.4 Installation
1
Adjusting screw A
2
Upper air tunnel
3
Installation-kit
4
Adjustment of height
1. . Fix the adjusting screw A on the upper air tunnel and install the appliance.
a. Align the adjusting screw A; there should be a gap of 1 mm between the
adjusting screw A and the top cupboard panel.
b. The power cord must not be trapped or kinked.
c. Place the appliance in the centre of the cupboard.
1
Screw B
2
Installation hole
3
Plastic cover