Instructions

THE OPERATING CONDITIONS DESCRIBED BELOW ARE NORMAL

AND DO NOT INDICATE A MALFUNCTION.

3. Items have dropped behind the

appliance.

3. Remove the items.

WATER DRIPS ON THE FLOOR.

1. The water pan

(located at the rear

bottom of the cabinet) may not be

properly levelled, or the draining

spout (located underneath the top of

the compressor depot) may not be

properly positioned to direct water

into this pan, or the water spout is

blocked.

1. You may need to pull the

refrigerator away from the wall to

check the pan and spout.

If the appliance shows a malfunction not noted on the schedule above or if

you have checked all items on the above schedule but the problem still exists,

please contact the shop you purchased the appliance at.

❖

The refrigerant generates a sound similar to flowing water.

❖

Sometimes you may hear a sound which is generated by the injection process

of the cooling circuit.

❖

The sides of the appliance may get warm while the appliance is running.

DISTINCT NOISE

When you operate the appliance for the first time or the temperature falls below

a certain level, the appliance will operate with high power to reach the preset

temperature.

CONDENSED WATER IN / ON THE APPLIANCE

may be generated inside or outside the appliance by high humidity or very warm

ambient temperatures.

CLICKING

You will hear the compressor click if it is activated or deactivated.

HUM

is caused by the compressor while running.

KNOCKING / SNAPPING

may be generated by sequential expansion and shrinkage of the components of

the cooling system. It is caused by variation of temperature before and after the

compressor is activated or deactivated.

Depending on model