Instructions

60
6. Lift the door and place it on a padded surface to prevent scratching it.
7. Take off the leg (8). Remove the three screws (9) that hold the lower hinge (10)
and take away the lower hinge (10).
8. Unscrew the screw (12) and remove the leg (13). Then transfer it to right side.
9. Remove the bolt-pin (11) and reverse the direction of lower hinge (10). Install
the lower hinge (10) into left side with three screws (9).
10. Insert the bolt-pin (11) to the lower hinge (10).
11. Remove the hinge pin (14) (15) (16) that is in the bottom of door. At the
other side of door, insert the replacement hinge pin that is supplied with the
appliance.
12. Set the door to its place and make sure the door seat at the lower hinge (10).
13. Fix the upper hinge (5) with the two screws (4).
14. Install the top with four screws (2) (3) and cover screw (2) with cover (1).
NOTICE! Adjust the door properly before you finally tighten the screws
of the hinge. The seal must close properly.