Instructions

57
T HE OPERATING PROCEDURES DESCRIBED BELOW ARE NORMAL
AND DO NOT INDICATE A MALFUNCTION .
U NSATISFACTORY COOLING CAPACITY .
➢ The door was frequently opened.
➢ The door is not properly closed.
➢ Encrusted ice inside the appliance.
➢ The current temperature setting is
too warm
➢ Warm or hot food inside the
appliance.
➢ The appliance is overfilled.
➢ The door seals are damaged.
➢ Select a different setting if necessary.
➢ Chec k th e d oo r / d oor se a l s .
➢ Defrost the appliance.
S TRONG FORMATION OF ENCRUSTED ICE .
➢ The door is not properly closed.
➢ The door seal is damaged or soiled.
➢ Close the door.
➢ Clean/replace the door seal.
T HE DOOR MAKES A STRANGE SOUND WHEN OPENED .
➢ The door seals are soiled.
➢ Clean the seals.
C OMPRESSOR DOES NOT START IMMEDIATELY AFTER HAVING CHANGED THE
SETTING .
➢ Normal operating condition.
➢ The compressor will start after a
while.
UNUSUAL NOISE.
➢ The appliance is not installed on a
flat and level ground. The appliance
touches a wall or another object.
➢ Frozen food is stored improperly.
➢ Items have dropped behind the
appliance.
➢ Install the appliance properly.
➢ Store food properly.
➢ Remove the items.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the aftersales service.
❖ The refrigerant generates a sound similar to flowing water.
❖ Sometimes you may hear a sound which is generated by the injection process of
the cooling circuit.
❖ The sides of the appliance may get warm while the appliance is running.