Instructions

21 Depending on model.
~ 71 ~
3.4 Change of the hinge position
WARNING! Switch off and unplug the appliance before changing the
hinge position. RISK OF ELECTRIC SHOCK!
CAUTION! The change of the position must be carried out by at least
two persons; otherwise, you may hurt yourself or damage the appliance.
NOTICE! You should contact a qualified technician if you want to have
the door swing reversed. Only try to carry out the steps described below
when you believe that you are qualified to do so.
NOTICE! Adjust the doors properly before you finally tighten the screws of
the hinges. The seals must close properly.
NOTICE! Do not tilt the appliance more than 45
0
.
PREPARATORY MEASURES
➢ Empty the appliance.
➢ If possible, remove all door trays, glass shelves, drawers, etc.
21
from the appliance
so that they cannot be damaged.
➢ It is necessary to tilt the appliance backwards while removing the door of the
appliance. Lean the appliance against a solid and immovable surface so it will not
slip while changing the hinge positions.
➢ Do not lay the appliance flat as this can damage the cooling system.
➢ All parts removed must be saved for proper reinstallation of the doors.
➢ Always remove the doors carefully. Keep the doors in a safe place so that they
cannot be damaged.
T OOLS REQUIRED ( NOT INCLUDED IN THE SCOPE OF DELIVERY )
FLAT BLADED SCREWDRIVER
PHILLIPS SCREWDRIVER
HEXAGON WRENCH