Instructions

~ 100 ~
FREEZER
➢ The freezer should be defrosted regularly to ensure proper operation.
1. Remove the contents from the freezer and put them into a cooling box.
2. Switch off the appliance by turning the thermostat to position 0 / AUS / OFF
and disconnect it from the mains or use a cut-off device.
3. When the encrusted ice melts put some dry cloths into the freezer-compartment
to hold the water back.
4. Do not use hot water to accelerate the defrosting operation.
5. Remove the big pieces of ice first.
6. Afterwards remove the small pieces of ice.
7. Wipe and dry the appliance and door seals with dry and soft cloths.
8. After cleaning: leave the door open for some time to ventilate the appliance.
NOTICE! If the appliance has been disconnected from the mains for a
longer period of time, allow the appliance to cool down for approx. 3 until
4 hours on medium thermostat setting [s. chapter 4.3 TEMPERATURE
SETTING (THERMOSTAT SETTING)] before you place any fresh or frozen food
in the appliance. If you place food in the appliance before it has reached
its normal operating temperature, the food can thaw and / or spoil.
6.2 Replacing of the illuminant
WARNING! The LED-illuminant must be replaced by a competent
person only. If the LED-illuminant is damaged, please contact a
qualified professional (not covered by the guarantee).
NOTICE! This product contains a LED light source of energy
efficiency class G according to EU-Regulation 2019/2015.