Instructions

a. When you do not set a power level within 1

minute, the appliance will switch off automatically.

You have to start at step 1 again.

b. You can change the power level whenever you

want while cooking..

The display indicates ↔ indicator of the power level alternately.

 You have not placed the cookware on the correct zone, or

 You use unsuitable cookware, or

 You use cookware which is too small or not centred properly on the cooking

zone.

 While using unsuitable cookware, the cooking zone does not heat up. The

display goes off automatically after 1 minute even if you have not placed

suitable cookware on the cooking zone.

3.5 How to stop cooking

1. Touch the SELECTION OF COOKING ZONE-sensor of the

cooking zone you want to switch off.

2. Switch off the relevant cooking zone by setting the -

sensor to 0. Check that the indicator displays 0 and

then H.

3. Switch off the appliance with the ON/OFF-sensor.

4. Beware of the hot surfaces of the cooking zones! An

H indicates which cooking zones are still hot. The H

disappears as soon as the relevant cooking zone has

cooled down. You can use the H for saving energy

→ you can start a new cooking procedure on a

cooking zone which is still warm/hot.

3.6 Key lock

You can lock the sensors to protect them from unintentional operation or

operation by children. When the sensors have been locked, all sensors except

ON/OFF are deactivated. You can switch off the appliance with the ON/OFF

sensor in case of emergency, but you should unlock the sensors afterwards.