Instructions

39
 The base of your cookware should be flat, contact the glass ceramic completely
and have the same diameter as the relevant cooking zone. Always centre the
cookware on the cooking zone. Cookware with a diameter of less than 140 mm
can be undetected by the appliance.
 Always lift your cookware, when you want to move it on the glass ceramic. Do
not push cookware as you may scratch the glass ceramic.
The base of cookware must have a minimum diameter relevant to the diameter of
the cooking zone you use the cookware on.
3.4 How to start cooking
1. Touch the ON/OFF sensor. When the power is
on, a beep sounds once; the display indicates -.
The appliance is in stand-by mode now..
2. Place a cookware on the desired cooking zone.
Always keep the bottom of the cookware as well
as the cooking zone clean and dry.
3. Select the power level by touching the SELECTION
OF COOKING ZONE sensor. The indicator flashes.
4. Set the power level with the + and - sensor.