Instructions

34
After the installation
 The power cable must not come into contact with cabinet doors or drawers.
 The appliance must be supplied with an adequate flow of fresh air from outside
the cabinet to the base of the hob.
 Install a thermal protection below the bottom of the appliance when installing it
above a drawer or a cupboard.
 The circuit breaker must be easily accessible.
Installation of the fixing brackets
CAUTION!
1. The hob must be installed by a qualified professional. Do not carry
out the installation yourself.
2. Do not install the appliance above cooling equipment, dish washers
or laundry dryers.
3. When installing the appliance ensure optimal heat radiation to
maintain the operating safety.
4. The wall and the reach of the heat radiation above the worktop must
be made of heat-resistant materials.
5. To avoid any damage, the sandwich layer and adhesive must resist
heat.
1. Place the appliance on a stable and smooth surface (use the packaging). Do not
carry out any physical force on the control elements of the appliance.
2. You must fix the brackets on the appliance.
A
B
C
D
Screw
Bracket
Screw hole
Bottom/housing
3. Insert the appliance into the installation opening.