Instruction Manual

~ 95 ~
7. Connect the appliance to the mains properly.
8. The rating plate is inside the appliance or at the back.
2.2 Summary of the installation steps
1. Install the condensation strip properly (s. chapter 2.3 CONDENSATION STRIP).
2. Install the water supply hose (s. chapter 2.5 INSTALLATION OF THE WATER SUPPLY
HOSE (COLD WATER).
3. Install the water drain hose (s. chapter 2.6 INSTALLATION OF THE WATER DRAIN
HOSE).
4. Connect the appliance to the mains (s. chapter 2.7 ELECTRICAL CONNECTION.
5. Install the appliance in the installation opening (s. chapter 2.9 INSTALLATION OF
THE APPLIANCE).
6. Level the appliance properly (s. chapter 2.10 PROPER LEVELLING).
7. Install the front decoration panel (s. chapter 2.11 INSTALLATION OF THE FRONT
DECORATION PANEL).
8. Adjust the door spring tension (s. chapter 2.12 ADJUSTMENT OF THE DOOR
SPRING TENSION.
9. Fix the appliance in the installation opening (s. chapter 2.14 FIXING OF THE
APPLIANCE).
2.3 Condensation strip
INSTALLATION OF THE CONDENSATION STRIP
(DEPENDING ON MODEL)
1. Before installation: you must install the condensation strip
31
on the bottom side
of the worktop to protect it from the water vapor released by the appliance. The
condensation strip deflects the water vapor from the worktop.
2. You will find the condensation strip inside your appliance.
32
3. Clean the bottom side of the worktop properly before you install the
condensation strip.
4. Remove the protective foil from the adhesive surface of the condensation strip.
5. Stick the condensation strip on the bottom side of the worktop.
6. The condensation strip must be flush with the edge of the work surface.
31
Depending on model.
32
Depending on model.