Instruction Manual

~ 158 ~
HOW TO REMOVE SPOTS FROM GLASSWARE.
a) Remove all metal-made objects.
b) Do not use a detergent.
c) Select the longest programme.
d) Start the programme. After 18 - 22 minutes the main-wash cycle begins.
e) Open the door pour 2 cups of white vinegar in the appliance (bottom).
f) Close the door and let the complete programme run. If these measures fail,
repeat the procedure but use ¼ cup (60 ml) of citric acid crystals instead of the
vinegar.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the aftersales service.
9.1 Error codes
❖ Error codes are indicated by the corresponding LED combinations of the
LEDs 1, 2, 3 and 4 (s. fig. and table below).
ERROR CODE
(LED COMBINATION)
MEANING
POSSIBLE CAUSES
LED 1
flickers slightly
Long water inlet
time.
➢ Tap is closed.
➢ Water intake is restricted.
➢ Water pressure is too low.
LED 1 and LED 2
flicker slightly
Required
temperature is not
reached.
➢ Malfunction of the heating
element
➢ Please contact the aftersales
service.
LED 3
flickers slightly
Overflow / leakage
➢ An element of the appliance
leaks.
➢ Please contact the aftersales
service.