Instruction Manual

~ 146 ~
2. Press and hold the « PROGRAMME » - BUTTON for more than 3 seconds. The
current cleaning programme is cancelled and the appliance is in STANDBY MODE.
3. Set the new cleaning programme using the « PROGRAMME » - BUTTON.
4. The programme indicator of the previously set cleaning programme goes off and
the programme indicator of the newly set cleaning programme goes on.
5. Press the « START / STOP » - BUTTON to start the newly set cleaning programme.
6. The cleaning programme starts after approx. 10 seconds.
6.4 Subsequent addition of dishes
WARNING! While the appliance is operating it is dangerous to open
its door as hot water may spurt out. RISK OF SCALDING! RISK OF
BURNS!
❖ You can put dishes later in the appliance unless the detergent container has
opened.
1. Press the « START / STOP » - BUTTON to interrupt the current cleaning
programme.
2. Wait 5 seconds before you open the door of the appliance.
3. Now you can add dishes.
4. Close the door of the dishwasher properly.
5. Press the « START / STOP » - BUTTON to continue the interrupted cleaning
programme.
6. The cleaning programme starts after approx. 10 seconds.