Instruction Manual

~ 145 ~
6. The programme function « HALF LOAD » is activated.
7. Press the « START / STOP » - BUTTON to start the set cleaning programme.
If the selected cleaning programme cannot be combined with the desired
programme function(s), these functions cannot be selected or will be cancelled
and the indicators switches off automatically.
PROGRAMME FUNCTION: « CHILD SAFETY LOCK »
❖ Your appliance is equipped with a CHILD SAFETY LOCK.
You can lock the control panel of the dishwasher to protect it from operation by
children or unintentional operation.
HOW TO ACTIVATE THE CHILD SAFETY LOCK
1. Press and hold the buttons « DELAY » und « EXTRA DRYING »
simultaneously for 3 seconds.
2. The operational status indicator goes on.
3. The child safety lock is activated and all operating buttons are locked (except the
« ON / OFF » - BUTTON).
HOW TO DEACTIVATE THE CHILD SAFETY LOCK
1. Press and hold the buttons « DELAY » und « EXTRA DRYING »
simultaneously for 3 seconds.
2. The operational status indicator goes off.
3. The child safety lock is deactivated and all operating buttons are released.
6.3 How to change a running cleaning programme
WARNING! While the appliance is operating it is dangerous to open
its door as hot water may spurt out. RISK OF SCALDING! RISK OF
BURNS!
You can only change a cleaning programme when it has run a short period
of time. Otherwise, the detergent has dissolved and the dishwater has
been drained. In such a case you must refill the detergent container.
1. Press the « START / STOP » - BUTTON to interrupt the current cleaning
programme.