Instruction Manual

~ 143 ~
HOW TO ACTIVATE THE PROGRAMME FUNCTION
« DELAYED-PROGRAMME-START »
1. Switch on the appliance using the « ON / OFF » - BUTTON.
2. The appliance is now in STANDBY MODE.
3. Set the desired cleaning programme using the « PROGRAMME » - BUTTON. Use the
corresponding buttons to set the desired additional programme functions.
Always observe the instructions in chapter 6.2 STARTING OF A CLEANING
PROGRAMME.
4. The programmable delay period is 3, 6, 9 or 12 hours. To activate the delayed-
programme-start, press the « DELAY » - BUTTON (« ») repeatedly until the
operational status indicator of the desired delay period (3, 6, 9 or 12 hours) goes
on.
Each press of the « DELAY » - BUTTON increases the delay period by three hours.
5. Press the « START / STOP » - BUTTON to start the set cleaning programme.
6. The set cleaning programme starts automatically after the set delay time has
elapsed.
If the selected cleaning programme cannot be combined with the desired
programme function(s), these functions cannot be selected or will be cancelled
and the indicators switches off automatically.
PROGRAMME FUNCTION: « EXTRA DRYING »
❖ The programme function « EXTRA DRYING » can be set for some cleaning
programmes.
❖ Select this programme function if you want to achieve extra thorough drying
results.
❖ This function extends the drying phase of a cleaning programme.
The energy consumption of a cleaning programme may be increased by this
programme function.
HOW TO ACTIVATE THE PROGRAMME FUNCTION « EXTRA DRYING »
1. Switch on the appliance using the « ON / OFF » - BUTTON.
2. The appliance is now in STANDBY MODE.
3. Set the desired cleaning programme using the « PROGRAMME » - BUTTON. Use the
corresponding buttons to set the desired additional programme functions.