Instruction Manual

~ 142 ~

7. Switch on the appliance using the « ON / OFF » - BUTTON (s. chapter 3.2 VIEW OF

THE CONTROL PANEL: OPERATING BUTTONS AND INDICATORS).

8. Press the « PROGRAMME » - BUTTON repeatedly to set a desired cleaning

programme: INTENSIVE - UNIVERSAL - ECO - GLASS - 90 MIN. - RAPID. The

programme indicator of the set cleaning programme goes on.

9. Press the corresponding button(s) to select an additional programme function (s.

chapter 6.2.1 SELECTION OF AN ADDITIONAL PROGRAMME FUNCTION.

10. Press the « START / STOP » - BUTTON to start the set cleaning programme.

11. The programme starts after approx. 10 seconds.

12. The operational status indicator of the appliance goes on.

6.2.1 Selection of an additional programme function

FOLLOWING ADDITIONAL PROGRAMME FUNCTIONS CAN BE SELECTED:

→ « DELAYED-PROGRAMME-START »

→ « EXTRA DRYING »

→ « HALF LOAD »

→ « CHILD SAFETY LOCK »

1. Press the corresponding button(s) to select an additional programme function.

2. Press the corresponding button(s) once or repeatedly, until the indicator of the

desired programme function or combination

is displayed.

If the selected cleaning programme cannot be combined with the desired

programme function(s), these functions cannot be selected or will be cancelled

and the indicators switches off automatically.

PROGRAMME FUNCTION: « DELAYED-PROGRAMME-START »

❖ You can set a delayed-programme-start.

❖ Set the cleaning programme and the desired additional programme function(s)

first and then activate this function using the « DELAY » - BUTTON: « ».

❖ You can select a delay period from 3, 6, 9 or 12 hours.

❖ Each press of the « DELAY » - BUTTON increases the delay period by three hours.

The programme function « DELAYED-PROGRAMME-START » may not be available

for all cleaning programmes (see also chapter 6.1 THE ADDITIONAL PROGRAMME

FUNCTIONS).

Depending on model.