Instruction Manual

~ 133 ~
4. Replace the dish rack (A), positioning the guide rails (B) between the middle (D)
and the lower wheel sets (E / s. fig. below).
A
UPPER DISH RACK
B
GUIDE RAIL (on both sides)
D
MIDDLE WHEEL SET (on both sides)
E
LOWER WHEEL SET (on both sides)
5. You can now push the dish rack back into the appliance. The upper dish rack is
in the high position (s. fig. below).
1. Repeat steps 1 - 3 as described above under « HOW TO LIFT THE UPPER DISH
RACK ».
2. Replace the upper dish rack (A), positioning the guide rails (B) between the upper
(C) and middle wheel sets (D); as shown in the figure below. The dish rack is now
back in the low position.
HOW TO LOWER THE UPPER DISH RACK